TERMINALS	Terminals are made from soft electrolytic copper tube.
WIRE CONSTRUCTION	This is made from 0.05 mm2 electrolytic grade  copper wire each bunch of herringbone construction to  reduce the  rate  of  wire fracture  by  providing  lateral  surface wear areas.  Its  total  sectional  area  shall not be less than  the  appropriate   sectional area   per  MCM/mm2 rating.
WIRE CONNECTION TO TERMINALS	Wires are brazed and crimped  in  the  soft  electrolytic copper   tube.   Wire   cannot   melt   out   during  brief overloads.
FLEXIBLE COVER	A  loosely fitting rubber  impregnated  sheath  encases most cable styles for mechanical protection.
OPTIONAL FEATURES :
SPRING FOR COOLING	A loosely  wound  hollow  spring  core  runs  down  the cable’s length. Forced air is metered  into  this  cooling core through a port in one  of  the  cable terminals. The resultant cooling effect greatly increases cable life.
PROTECTION SLEEVES	In order to eliminate  breakage  of  strands  due  to  the frequent accute bending operations, protection  sleeves are, provided on the areas of both the terminal joints.